Warlark-80 Manual
The flight control board of Warlark-80 is based on F3 EVO hardware, supports both CleanFlight and
BetaFlight firmware. There are 3 kinds of hardware for its built-in compatible receiver: A---CYRF6936,
B---CC2500
，
C---A7105. There are 6 optional protocols for the built-in compatible receiver: 1=>DSMX/2; 2
=>DEVO (on testing); 3 =>Futaba SFHSS; 4=> FrSky (on testing); 5=> FlySky AFHDS; 6=>Hubsan(on
testing);
Warlark supports plug and play VTX-25MW analog video transmitter module or VTX-25MW &
OSD(WM OSD) module and analog camera.
Fetures:
1
）
F3 EVO flight control board
2) Optional built-in receiver
3) Diagonal motor to motor distance: 80mm
4) 7*16mm high KV brushed motors
5) 35mm ducted fan props
6) Working voltage: 3.7V(1S lipoly battery)
7) Flight weight: 39.4g (FPV with OSD version), 35.0g(No FPV version)
8) Flight time: 4 minutes (FPV with OSD version, 5 minutes (No FPV version)
9) No soldering for mounting VTX-25MW analog video transmitter module or VTX-25MW&OSD module
(note: the analog VTX is 40CH)
10) The working frequency of the VTX is controlled by transmitter
11) Supports parameter setting up through transmitter (only FPV with OSD version gets the function)
HOW TO ENTER flight control parameter setting up menu through OSD
