4. Configuration: Router Mode
31
AirLive N.Power User’s Manual
The FTP configuration can be found in the “Internet Settings” menu. By default, it is
disabled. You must enable the option to start FTP. Please remember to click on “Apply”
button after finish settings.
Enable FTP Server:
By default, the FTP server is disabled. Please enable by
checking the box and press “Apply” button.
Service Port:
You can change the TCP/UDP port for FTP access here. The
default is port 21; it is advised to leave the settings at default. When you change
the service port, the FTP link will also change. For example, if you change
service port to 2121. The LAN FTP Link will become ftp://192.168.1.254:2121.
Internet Link:
The N.Power will automatically display the Internet FTP link so
you can copy and email to your friends for access. This link is for FTP access via
Internet.
Local LAN Link:
This is the link on the local LAN where you can access the
content of the FTP file sharing. Press the “Copy Link” button and paste it to your
browser for access.
Account Type:
There are 2 different FTP account types.
Anonymous (No Password):
There is no password protection for this
account type. Anyone can access the FTP directory. The access is “Read
only”. That means you can download files but not upload.
Password
: Up to 3 users account can be configured. Each requires
username and password to access. Each user can have different sharing
directory. You can choose “Read” and/or “Write” access for each account
type. When you choose the “Password” Account Type. The following
“Account Table” will appear:
