6. AP Mode
59
AirLive N.Power User’s Manual
Disable:
When selected, no MAC address filtering will be performed.
Allow list:
When selected, data traffic from only the specified devices in the
table will be allowed in the network.
Deny list:
When selected, data traffic from the devices specified in the table
will be denied/discarded by the network.
6.2.6 Associated Client
Wireless Settings -> Associated Client
You can check the wireless clients’ status on this table
MAC Address
: MAC address of the wireless clients. If you need to find the IP
address, please go to
Status->Client Table
menu.
Power Saving
:
0
: The power saving mode is off.
1
: The power saving mode is on.
Modulation
: Show the which MCS level is used in 11n mode
Channel Width
: This indicates whether client is using 20MHz or 40MHz channel
wdith.
RSSI (dBm)
: The signal strength of the client device.
Time (Sec)
: The connected time of the wireless client.
6.2.7 Advanced Settings
Wireless Settings -> Advance Settings
Channel Width:
You can choose 20MHz or 20/40MHz channel width. Choose
20MHz for compliance with laws in some countries. 40MHz offers faster performance
than 20MHz