Page 21
Page 14
Stripe (RAID 0)
- Two volumes will mount on your desktop, each made
up of a high-speed RAID-0 Stripe - combining two volumes each. Using
a RAID-0 Stripe format, if you had 4 1TB drives in your OWC Mercury
Rack Pro, you would have 2 2TB volumes mount on your desktop.
(
IMPORTANT
)
Realize that reconfiguring your RAID will destroy
all data on this storage enclosure.
Be sure you have a backup
before proceeding
. Make sure that the power is turned off.
Look at the back of the OWC Mercury Rack Pro and locate the
switches to the right of the USB port. Make sure they are both
on the “RAID 0” position (RIGHT).
Choose the connection method you desire (USB, FireWire 800),
and power on the OWC Mercury Rack Pro enclosure. You will
see these dialog boxes pop up. Click on “Initialize”.
Step
1
Step
2
Step
3
The maximum volume size will automatically be prompted in
the box at the bottom. If you wish to adjust the size smaller, you
can do so. In this demonstration we will use a maximum size volume.
Click Next when you are ready.
Choose a new drive letter for the volume. It will
automatically prompt an unused volume letter. Click Next
when you are ready.
Step
9
Step
10
Setup your OWC Mercury Rack Pro as a
RAID-0 (2 striped hard drives) on a Macintosh