Place the top of the enclosure on the bottom, and sliding from the rear, lock it
in place to the bottom of the enclosure.
Insert the 2 long screws through the back of the enclosure, and while holding
the drive mechanism in from the front, tighten the screws fully to secure the
drive mechanism into the enclosure.
Turn the enclosure over so you can see the bottom side. Insert the short Phil-
lips screws through the enclosure, into the top cover you just installed, and
tighten. Finally, place the included rubber feet on the bottom of the enclosure.
To connect the external optical enclosure to your computer, attach the
included USB “Y” cable to the USB mini B port and the USB A connector to your
computer. Depending on the drive mechanism you installed, and the power of
your USB port, you may need to connect the second USB A connector from the
included USB “Y” cable to another USB port on your computer. A second op-
tion would be to purchase a separate standalone power supply - available at:
http://eshop.macsales.com/search/OWCMOTGPWR
Most customers will not need either the “Y” cable or a standalone power cable
but will be able to use the enclosure with any mini B USB to standard A USB
cable.
We hope you enjoy your new external storage device!
Copyright ®2010 Other World Computing All Rights Reserved. Other World Computing’s 1 year Limited Warranty is not transferable and subject to limitations.
OWCMANVLS2ASY
