Begin by removing the top cover from your OWC “Value Line” enclosure.
Turn the enclosure over and remove the 4 Phillips screws from the bot-
tom and them remove the top cover by lifting it straight off, exposing the
interior of the case and green bridge card.
Slide your optical drive mechanism into the body of the OWC “Value Line”
enclosure from the front, inserting the SATA port on the optical drive into
the bridge card in the rear of the enclosure.
Once you have the drive fully seated, insert the 4 Phillips screws into the
body of the optical drive (both sides) to secure it to the enclosure.
