Ownboard C-series, User Manual

www.ownboard.net

Charging the Battery

Your E-Skateboard comes with a rechargeable lithium ion battery.  Before your first ride you must fully charge the 

E-Skateboard to fully. For every ride after, charge your E-Skateboard until it is fully charged, and NOT LONGER. 

Do not leave any chargers plugged in overnight, or leave it plugged in past the charge time. 

1. Plug one end of the power cord into a grounded AC outlet and the other into the  E-Skateboard’s Charging Port. 

The red charging light on the charger unit will turn on.

2. The red light will turn green once fully charged. Recharge the E-Skateboard after each use.

(Please note:Always plug the charger into the wall first before the device. If the wall outlet doesn’t have power and

 you plug the charger into the device first,it will light green,even if the battery is not full.So always plug into the wall 

first to make sure there is power)

THE CHARGER OFFERS A CHARGING STATUS ON THE TOP OF THE CHARGER:

CHARGING LIGHT RED:

 Battery is charging.

CHARGING LIGHT GREEN:

 Charging is complete. 

When you are done charging the battery, remember to cover the Charging Port.

Don’t use the E-Skateboard if the battery emits strange odors, overheats, or begins leaking. If the battery does leak, 

do not touch any leaking materials, as the battery contains dangerous substances. Do not open the battery and do 

not insert anything into the battery. 

Only use the provided charger for the E-Skateboard. Do not charge the battery if it has over-discharged. It should 

be discarded for your safety. Do not turn on the  E-Skateboard while it is charging.

To charge your Remote Control, plug the charging cable into a USB port, then plug into the Remote Control’s 

Charging Port. When the Charge Light is on, the Remote Control is successfully charging. The Charging Indicator 

Light on the Remote Control will turn RED when charging, and will turn to GREEN when fully charged.

NOTE: The remote should be charged within 5 V ,1 A charger, or you can use the computer 

USB interface to charge it, Charging voltage over 5 V will do harm to the remote battery.

6