Ownboard C-series, User Manual

www.ownboard.net

Operating the E-Skateboard

9

Throttle/Brake Control:

User can move the “throttle scroll wheel” forward to speed up, and move it backward to brake. 

Notes: Do not move the “throttle scroll wheel” when pressing the Button A (/Power Switch). If you see the four LEDs

 (on the remote) flash in the following way: “●○○●”, “○●●○”, “●○○●”, “○●●○”..., then please check if the “throttle scroll 

wheel” is at the neutral/zero throttle position.

Switch of Skateboard Direction:

When the board is moving forward, if the user moves the Switch C backward, the remote will vibrate a single, short 

vibration (0.1 second), the four LEDs will flash one by one from front to back to indicate the “Backward mode”. When 

the board is moving backward, if the user moves the Switch C forward, the remote will vibrate a single, short vibration, 

the four LEDs will flash one by one from back to front to indicate the “Forward mode”. 

Note: this operation effects only when the “throttle scroll wheel” is at the neutral position. 

Switch of Gears:

There are two gears available for the E-Skateboard: 1st gear & 2nd gear. 

In 1st gear, the speed ranges from 0 to 20km per hour; in 2nd gear, the speed ranges from 0 to 38km per hour. 

When in 1st gear, if press the Button B, the remote will vibrate a single, short vibration, the four board power LEDs 

will flash one by one from one end to the other end to indicate that the board is in 2nd gear now. 

When in 2nd gear, if press the Button B, the remote will vibrate a single, short vibration, the four board power LEDs 

will flash one by one from one end to the other end to indicate that the board is in 1st gear now. 

Note: this operation effects only when the “throttle scroll wheel” is at the neutral position. The specific gear and speed 

can be adjusted by the specific ESC the user uses.