4.Quick Start
make a check on the instrument according to the following steps:
1. Check whether there is any damage caused by transportation.
If it is found that the packaging carton or the foamed plastic protection cushion has
suffered serious damage, do not throw it away first till the complete device and its
accessories succeed in the electrical and mechanical property tests.
2. Check
the
Accessories
The supplied accessories have been already described in the
Appendix B
"Accessories" of this Manual. You can check whether there is any loss of accessories
with reference to this description. If it is found that there is any accessory lost or
damaged, please get in touch with the distributor of Lilliput responsible for this
service or the Lilliput's local offices.
3. Check the Complete Instrument
If it is found that there is damage to the appearance of the instrument, or the
instrument can not work normally, or fails in the performance test, please get in touch
with the Lilliput's distributor responsible for this business or the Lilliput's local offices.
If there is damage to the instrument caused by the transportation, please keep the
package. With the transportation department or the Lilliput's distributor responsible
for this business informed about it, a repairing or replacement of the instrument will
be arranged by the Lilliput.
Foot Stool Adjustment
Unfold the foot stools on the bottom of the generator, as
⑦
in
Figure 4-1
.
Power-On Check
AC Power Input Setting
AG4151 adopt 110V/220V AC power source. Users should regulate the voltage scale of
the
Power Switch
according to the standards in their own country (see
Figure 4-2
) at the
rear panel and use an appropriate fuse.
Voltage
Fuse
110V 125
V,
F4AL
220V 250
V,
F2AL
To change the voltage scale of the instrument, do the following steps:
(1)
Turn off the power button at the front panel and remove the power cord.
(2)
Check if the fuse installed before leaving factory (250 V, F2AL) can match with the
selected voltage scale; if not, pry the cover open using a straight screwdriver (see
⑦
in
Figure 4-2
), change the fuse.
8
