5.Front Panel Operation
(3)
Remove the U disk
: Remove the U disk from the
USB Host port
on the rear panel.
The system will inform you "The USB device is removed", and the "USBDEVICE" in
the storage menu will disappear.
To Edit the File Name
In file system, the user can edit the name of a file or a folder. When the system needs the
user to input a name, an input keyboard will appear.
Figure 5-22: Edit the File Name
(1)
Turn the knob or press the
◄
/
►
direction key to move the cursor left and right in
the keyboard; press the
▲
/
▼
direction key to move the cursor up and down. Press
F3
to switch between capital and small of the characters.
(2)
Press
F1
to enter the current character. Press
F2
to delete the last character .
(3)
Press
F4
to finish editing and save the file. Press
F5
to cancel the save
operation.
Note
: The length of file name is up to 15 characters.
To Set the Utility Function
Press
Utility
function key to enter the Utility Menu. You can set the parameters of the
Generator such as: Display Parameter, Output Parameter, Interface Parameter and System
Setting. Press
Utility
again to exit the Utility Menu.
To Set Display Parameter
To Set the Bright
(1)
Press
Utility
and choose
Disp Setup
, press
F1
to select Bright.
(2)
Turn the
knob
to change the value; or press the number keys to input the desired
value in percent, press
F4
to select the unit. The bright range is 0%
～
100%.
To Set the Separator
The user can set the separator of the displayed parameter.
30
