background image

General Warranty 

We warrant that the product will be free from defects in materials and workmanship 
for  a  period  of  3  years  (1  year  for  accessories)  from  the  date  of  purchase  of  the 
product by  the original  purchaser  from our  company.  This  warranty only  applies  to 
the original purchaser and is not transferable to a third party.   

If the product proves defective during the warranty period, we will either repair the 
defective product without charge for parts and labour, or will provide a replacement 
in  exchange  for  the  defective  product.  Parts,  modules,  and  replacement  products 
used by our company for warranty work may be new or reconditioned like new. All 
replaced parts, modules and products become the property of our company. 

In  order  to  obtain  service  under  this  warranty,  the  customer  must  notify  our 
company of the defect before the expiration of the warranty period. Customer shall 
be  responsible  for  packaging  and  shipping  the  defective  product  to  the  designated 
service centre, a copy of the customers proof of purchase is also required. 

This  warranty shall  not  apply  to any  defect,  failure  or damage  caused  by improper 
use or improper or inadequate maintenance and care. We shall not be obligated to 
furnish service under this warranty a) to repair damage resulting from attempts by 
personnel  other  than  our  company  representatives  to  install,  repair  or  service  the 
product;  b)  to  repair  damage  resulting  from  improper  use  or  connection  to 
incompatible equipment; c) to repair any damage or malfunction caused by the use 
of not our supplies; or d) to service a product that has been modified or integrated 
with  other  products  when  the  effect  of  such  modification  or  integration  increases 
the time or difficulty of servicing the product.

 

 

Please contact the nearest Sales and Service Offices for services. 

   

Excepting  the  after-sales  services  provided  in  this  summary  or  the  applicable 
warranty statements, we will not offer any guarantee for maintenance declared or 
hinted,  including  but  not  limited  to  the  implied  guarantee  for  marketability  and 
special-purpose  acceptability.  We  should  not  take  any  responsibilities  for  any 
indirect, special, or consequent damages. 

 

Summary of Contents for XDM1041



















Reviews: