Always dispose of unwanted tools, accessories and packaging materials in an
environmentally friendly manner.
For EU and EEA countries only.
In observance of European Directive on Waste Electrical and Electronic Equipment
(WEEE) and its implementation in accordance with national law, electrical goods
that have reached the end of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Do not dispose of electrical goods with domestic waste materials as inappropriate
disposal may cause potential hazards to the environment and human health.
For further information, please contact your local authority or the retailer from
whom you purchased the product.
This product does not contain any restricted substances in concentrations and
applications which are banned by the European
RoHS Directive.
OPERATOR’S INSTRUCTIONS
Please retain this information for future reference.
COOLANT-PROOF IP67
DIGITAL CALIPER
150mm/6” OXD-331-7420K
200mm/8” OXD-331-7424K
300mm/12” OXD-331-7428K
l
Inductive and relative measuring
system
l
Responding speed · >3.2mls
l
CR2032,Li-ion,service life>1 year
l
IP67
To ensure operator safety, use this instrument in conformance with the directions and
specifications given in this leaflet.
l
The outside and inside measuring faces of this caliper have sharp edges.
l
Do not measure the workpiece if it is rotating.
l
Do not recharge or incinerate the battery. Dispose of in an appropriate manner.
l
Immediately consult a doctor if the battery is accidentally swallowed,
Resolution:
..............................................................................................0.01mm/0.0005”
Measuring range:
.....................................0-150mm/0-6”/0-200mm/0-8”
0~300mm/0-12”
Indication Error:
............................................0-150mm/0~6”=0.02mm/0.001” 0-200mm/
0-8”=0.03mm/0.0015” 0-300mm/0-12”=0.03mm/0.0015”
Working Temperalure:
..............................................................................................5
°
-40
°
C
Storage:
.................................................................................................................-10-60
°
C
l
Apply clean oil to the sliding surfaces.
l
Do not subject the caliper to water or oil. Apply a slight amount of low-viscosity oil to
the scale surface to keep out water.
l
Do not scratch the scale surface.
l
Do not use an electrical engraver when appying a ID number. An external voltage
applied to the caliper may result in its failure.
l
Do not disassemble the caliper.
l
Do not expose to extreme humidity, direct sunlight or dusty environments.
l
Do not apply excessive force.
Specification
Care
0
0
10
20
inch
mm
1
OXFORD
OXFORD
PRECISION
90
100
110
120
130
140
150
6
5
4
Safty
DECLARATION OF CONFORMITY
We hereby certify that the ABS Digital Caliper
150mm/6” OXD-331-7420K
200mm/8” OXD-331-7424K
300mm/12”OXD-331-7428K
complies with all the relevant provisions of the
EMC Electromagnetic Compatibility Directive 2014/30/EU
Standards Applied: EN 61326-1:2013 & EN 61326-2-2:2013
RoHS Restriction of Hazardous Substances Directive 2011/65/EU
Signed:
Date: 21st January 2021
Name: Toni Johnson
Position: Compliance Director
QUALITY GUARANTEE & WARRANTY
OXFORD PRECISION products carry a one
year manufacturer’s warranty.
OXFORD PRECISION products are designed & manufactured to the highest
standards & specifications.
Assuring the quality and performance required by
all sectors of industry.
OXFORD PRECISION products are fully guaranteed
against faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear
and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
OXFORD PRECISION, P.O. Box 14, Wigston, Leicester, England, LE18 1AT.
