2
INTRODUCTION
2 in 1 LAN Tester & Multimeter is a innovative tester that allows the user easy to measure DC/
AC Voltage/Current, Resistance, Continuity, diode and verify the cable continuity, open short,
cross-connect. The included remote terminator allows the user to test installed cable either at
a wall jack or a patch panel adding up to value and convenience. Proper use and care of this
meter will provide years of reliable service.
FEATURES
• 2 in 1- LAN Tester & Multimeter
• Measures DC/AC Voltage, DC/AC Current, Resistance,
Continuity, diode and LAN tester
• 3-1/2 digit (2000 count) LCD display for multimeter functions
• LED Displays the actual pin configuration of 10BASE-T
AND 10BASE-2 Thin Ethernet, FJ45/RJ11 modular,
258A, TIA-568A/568B and Token Ring cables
• Double Molded housing
• CAT III 600V; CAT II 1000V
• Provides easy to read continuity and fault status display
• Checks for continuity, open wire, ground wire, shorted pair
and crossed pair faults
• Allows for remote testing of installed cables from a wall jack
or patch panel
• Auto or manual scanning for LAN tester
• Auto ranging with auto power off for Multimeter functions
Symbols used
This symbol, adjacent to another symbol or terminal, indicates the user must refer to
the manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous
voltages may be present.
Double insulation
