4
SPECIFICATION
•
Zero - Scale is zeroed, gross weight is 0, tare is 0
•
Tare - Display reading is net weight; tare is not 0
•
kg - Overall unit of measure is kg
•
lb - Overall unit of measure is lb
•
PIECE WEIGHT - The weight per piece used to calculate the piece quantity
•
Print - Data output indicator
•
g - The per piece unit of measure is g
•
lb - The per piece unit of measure is lb
•
COUNT – Calculated number of pieces base on total weight and piece weight
•
Low Batt - Battery should be charged soon
•
AC - AC power is being used
•
CHG - Battery is charging
FUNCTION KEYS
• 0 – 9 - Numeric keys for data entry
• Unit - Toggles weight unit of measure
•
0/Clear - Press for 4 seconds to clear data or
accumulated values
• Enter - Confirms the operation or saves the data
• Print - Outputs data via the RS232 port
•
Accu - Accumulates the current weighed values.
Press for 4 seconds to display total accumulated
quantities and weight.
• Tare - Tares the weight when the scale is stable
• Hi/Lo - Sets upper and lower check quantity limits
• PCWT/SPL - Enters piece weight calculation mode.
•
RC.PLU - Recalls a stored piece weight or tare
weight and its unit of measure
• ST.PLU - Stores a piece weight or tare weight and its
unit of measure
•
ZERO/ON/OFF - Powers on the scale. Press for 4
seconds to power off the scale. In weighing mode,
sets the zero point. In calibration, setup, and other
modes, exits the current mode.
OXD-844-2040K-INSTRUCTIONS.indd 4
OXD-844-2040K-INSTRUCTIONS.indd 4
29/06/2020 10:07
29/06/2020 10:07
