6
5
To enter a weighed tare:
1. Place an empty container on the platter and press the Tare key. The display will return to zero,
eliminating the weight of the container. The Zero light will go off and the Tare light will be lit.
2. To clear the weighed tare, remove all weight from the scale. The display will show a negative
weight. Press the TARE key to return the display to zero, eliminating the weight of the container.
The Tare light will go off and the Zero light will be lit.
To manually enter a known tare:
1. Use the number keys to input the tare weight. Your entry will be displayed in the “WEIGHT”
display window. Then press the TARE key to confirm or press the ZERO/ON/OFF key to exit
and not confirm. Example: With the platter empty, entering 100g and pressing the TARE key will
display “–0.100” kg.
2. To recall the previously stored tare weight, press the RC.PLU key. Press the ZERO/ON/OFF key
to return to weighing.
Note: The previously stored tare weight can only be recalled with the RC.PLU key when in tare
setting mode.
3. To clear the manually entered tare weight, enter “0” and press the TARE key to confirm.
NOTE: For a tare greater than 10kg, the weight window will display “dSP.oVr” when the weight
is removed from the platter. The tare function is still working properly, but since the “WEIGHT”
window cannot display “-10.0000”, “dSP.oVr” indicates that the displayed value is beyond the
range of display.
ACCUMULATION MODE
The accumulation function allows storage of weighed piece quantities and the summation of those
quantities.
1. With an object on the scale, press and release the ACCU key to add the displayed value to the
accumulated total.
2. The indicator will display “Add” in the WEIGHT window, the PIECE WEIGHT window will display
the number of accumulation instances, and the COUNT window will display the number of
accumulated piece quantity.
3. Press and hold the ACCU key for 4 seconds to display the accumulated values. The WEIGHT
window will display “Add”, the PIECE WEIGHT window will display the number of accumulation
instances, and the COUNT window will display the accumulated quantity.
4. To clear accumulated quantities, press and hold the 0/CLEAR key while the accumulated
values are being displayed until they reset.
NOTE: Powering off the scale will also clear the accumulated values.
NOTE: Accumulated quantities or instances over 999999 will display “Err01”.
COUNTING MODE
The counting function calculates and displays the piece quantity of the load that is being weighed.
You can enter the piece weight by one of two methods:
1. To enter a piece weight by weighing a known quantity:
a. Place a known quantity of objects onto the platter and press the PCWT/SPL key for 4 seconds
to enter piece weight calculation mode.
b. The WEIGHT window will display the weight, the PIECE WEIGHT window will display “SPL.PCS”
(Sample Pieces), and the COUNT window will display the known quantity that you will input.
OXD-844-2040K-INSTRUCTIONS.indd 6
OXD-844-2040K-INSTRUCTIONS.indd 6
29/06/2020 10:07
29/06/2020 10:07
