5 of 5
TOOLS REQUIRED:
SCREW DRIVER (Not Included)
35-190
5
5-V-01
Thank you for your purchase!
The product is ready for use after removing all packing material. If you want to move the shelves up or
down follow these steps:
1. Before removing the shelves, unscrew and remove the screws, which are attached to the shelf pegs
underneath the shelves, with a screw driver.
2. Determine the desired height for the shelves using the corresponding pre-drilled holes located on the
inside of the cabinet.
3. Insert the shelf pegs into the pre-drilled holes until fully secure. Place the shelves onto the shelf pegs,
making sure the shelf is stable. Reinsert and tighten the screws back into the shelves by inserting the
screw through the pre-drilled hole of the shelf peg and into the shelf. See illustration.
