Installation guidelines
21
Table 5. ACS contacts assignment
Contacts marking
Contacts assignment
LEFT, RIGHT
single pass left / right
(lowest priority)
STOP
non-authorized pass (mode "Stop")
(medium priority)
AP
opening of wings ("anti-panic")
(highest priority)
GND
common contact
Inputs for ACS connecting differ on priorities:
•
AP input has the highest priority. As long as this input is closed on
GND contact, wings of the speedgate are open and do not respond (!!!) to
other signals;
•
STOP input has medium priority. When the input is closed on GND
contact the speedgate switches to "Stop" and does not respond to other
signals, except AP.
•
LEFT and RIGHT inputs have the same low priority and include a
single passage in one direction or another. If both inputs are closed,
passage is allowed in the direction the input which was closed first. If
passage was not performed the speedgate will set to "Stop" mode
automatically in 5 seconds.
CAUTION (!) In case of closure of one of STOP (or) AP inputs -
commands from the remote control panel cannot be accepted, i.e. ACS has
a higher priority.
