Installation guidelines
33
Fig. 15
6.5.2.
Slide the LED panel to the stop in the direction indicated
in Fig. 15. Carefully lift the panel.
6.5.3.
Remove two M4 screws (8, Fig. 16) and remove the
universal bracket for readers (2, Fig. 16).
6.5.4.
Disassemble the reader, removing the M3 screw (6, Fig.
16), and set its lower part (1, Fig. 16) on the bracket using the two M4
screws with nuts, washers and lockwashers (3, Fig. 16).
6.5.5.
Put the cable (4, Fig. 16) in the bracket hole, install the
top cover of the reader (5, Fig. 16). Tighten the M3 screw (6, Fig. 16).
Панель
индикации
LED panel
