Full-height turnstile Oxgard Praktika Т-10 (T-10H)
6
PROTECTING THE FUTURE
Both turnstile variations ensure prolonged service life of the turnstile
in adverse environmental conditions.
General view and overall dimensions of the turnstile are shown on
Fig. 2 and 3.
The turnstile consists of:
- fixed enclosure panel (1);
- mobile enclosure elements (rotatory wicket door) (2);
- fixed enclosure elements (3);
- upper module (4);
- actuator (5) within the upper module.
The general view of the turnstile is represented by Fig. 2. The middle
part of the turnstile’s upper module is provided with two removable lock
doors for fast access to the cross-board when connecting CB and ACS
cables and the power supply cable. The cable inputs shall be led to two
racks of the fixed enclosure panel (at choice) (Fig. 2).
In its initial state the turnstile
is closed (the turnstile is closed for
passage in both directions).
Two options are provided for occlusion of the passage zone by the leaves
in the initial state of the turnstile to determine its possible operating
modes:
- in the initial state of the turnstile the passage zone is occluded by
one leaf; from this state the standard operating modes of the turnstile
can be assigned.
Summary of Contents for Praktika T-10
