3
•
During
the
initial
start
-
up
some
smoke
or
smell
may
arise
.
This
is
a
normal
process
and
does
not
necessarily
mean
that
the
device
is
defective
.
•
DANGER
OF
BURNING !
Never
touch
the
device
during
the
operation ! The
housing
heats
up
to
the
housing
temperature
TSURFACE
.
•
Don’t
switch
the
device
on
and
off
in
short
intervals
as
this
would
reduce
the
lamp’s
life
.
•
HEALTH
HAZARD
!
Never
look
directly
into
the
light
source
,
as
sensitive
persons
may
suffer
an
epileptic
shock (especially
meant
for
epileptics)
•
Always
disconnect
from
the
mains
,
when
the
device
is
not
in
user
or
before
cleaning
it
.
•
Please
note
that
damages
caused
by
manual
modifications
on
the
device
or
unauthorized
operation
byunqualified
persons
are
not
subject
to
warranty
.
•
Keep
away
children
and
amateurs
from
the
device !
•
There
are
no
serviceable
parts
inside
the
device
.
Maintenance
and
service
operations
are
only
to
be
carried
out
by
authorized
dealers
.
OPERATION
INSTRUCTIONS
1)The
system
has
DMX
online
and stand-alone
mode. DMX
online
mode
can
link
other units
and be
controlled by DMX controller; The stand-alone has some functions of sound, Auto Mixcolor and Strobe and so
on..When Slave fixture is under No-DMX / No IR OFF mode then it will turn DMX mode 4 with DMX signal.
2) Master / Slave Setting: The master (MODE5-MODEL 12/IR mode), and the slave(MODE1/2/4). When there is
DMX signal, Master turns into DMX mode3 (mode 3 don’t change). If not, fixture turn back to the last mode.
3) If a DMX signal is present under Online mode, the DMX LED will blink very fast to indicate, While under Master
/ Slave mode, Master’s LED indicator will light and Slave’s one will blink to indicate.
4)Display screen will turn off after 10s. In this condition, pressing any keys is useless; turning back when, pressing
any keys with 3s. In OFF mode, IR’s function is not restrict, it runs usual, but screen is off.
5) In IR mode, pressing any keys, the fixture would turn back to the last mode.
6) With any R/G/B output, the fan will on. W/O R/G/B output, after 3s, the fan stops.
1. IR
INSTRUCTIONS
MODE
UP
DOWN
DISPLAY
BUTTON NAME
FUNCTION DESCRIPTION
6
MODE
NO.
FUNCTION DESCRIPTION
DISPLAY
1XXX (XXX=001-512)
2XXX (XXX=001-512)
3XXX (XXX=001-512)
4XXX (XXX=001-512)
ncXX (XX=00-35)
r XXX (XXX=000-255)
g XXX (XXX=000-255)
b XXX (XXX=000-255)
StXX (XX=00-99)
ShXX (XX=00-15)
FLXX (XX=00-15)
So
ds-1
ds-2
DMX mode 1 (1CH)
DMX mode 2 (2CHS)
DMX mode 3 (3CHS)
DMX mode 4 (7CHS)
Manual Macro mode 1
R Manual mode (static)
G Manual mode (static)
B Manual mode (static)
Manual strobe setting
Manual fade mixcolor mode
7 colors strobe
Audio mode
Display screen
1
3
5
7
9
11
13
2
4
6
8
10
12
Macro Mode
R(CH1), G(CH2), B(CH3)
35 black, Macro value
7 colors sound control
Macro Mode (Ch1) + adjust luminance (Ch2)
DMX MODE
R adjust luminance , 000-255
G adjust luminance , 000-255
B adjust luminance , 000-255
Adjust strobe speed, 00-99: No-strobe-strobe fastest
Adjust fade mix-color speed, 00 slowest, 15 fastest
Adjust 7 colors strobe speed, 00 slowest, 15 fastest
Display screen permanent light
Display screen will turn off 10s.In this condition pressing any keys is
useless; turning back after pressing keys 3s.
2. DISPLAY FUNCTION
INSTRUCTIONS
1 > DMX MODE 1 (1 CH, DISPLAY: 1XXX; XXX = DMX address, press up/down change DMX address.
2 > DMX MODE 2 (2 CH, DISPLAY: 2XXX; XXX = DMX address, press up/down change DMX address.
3 > DMX MODE 3 (3 CH, DISPLAY: 3XXX; XXX = DMX address, press up/down change DMX address.
4 > DMX MODE 4 (7 CH, DISPLAY: 4XXX; XXX = DMX address, press up/down change DMX address.
Figure 1
Figure 2
DMX mode 1
DMX mode 2
DMX mode 3
CH6
Mode
(0-35)Adjust
colors
(36-71)
(72-107)
(108-143)
(144-179)
(180-215)
(216-251)
(36-71)
(72-107)
(108-143)
(144-179)
(180-215)
(216-251)
7 colors
audio control
(252-255)
7 colors
audio control
(252-255)
Dimmer
0-255:
min-max
0-15: static
16-255:
16 different
strobe
0-255:
16 different
speed
(0-35)
Adjust colors
Mode
Master DIM
Macro
0-13(off)
Speed/Strobe
CH1(0 - 255)
CH1(0 - 255)
CH1(0 - 255)
CH1
0
0
0
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
CH4
14-255(macro)
0 - 7 : OFF
8 - 255 JOIN IN
CH2(0 - 255)
CH2(0 - 255)
CH2
CH5
CH3(0 - 255)
CH3
CH6
CH7
Macro
Macro
R
R
1-255
1-255
1-255
G
G
B
B
luminance
Function
Function
Function
Function
No out
RGB/Strobe
35 colors macro mode
Light mode
Dim mode
Light and Dim mode
Light changes with sound value
Auto mix color mode
3 colors strobe
7 colors strobe
35 colors s black
35 colors s luminance
R/G/B luminance setting
3. DMX FUNCTION
Select your desire mode.
DMX: select address; run
AUTO
MODE;
adjust MODE speed. MACRO : select color.
DMX: select address
;
To run AUTO MODE.
adjust MODE speed. MACRO : select color.
MODE
UP
DOWN
