1.
Place Toaster on a stable, flat surface.
2.
Plug power cord into 110V outlet.
3.
Insert one slice of bread per slot. When
toasting a single slice of bread, place
bread in the rightmost slot.
4.
Twist dial to select browning level.
5.
Press the “down” arrow to lower the
elevator and start the toasting cycle.
a.
The darkness level dots will count
down to let you know when the cycle
will end.
b.
Adjust the browning setting at any time
during toasting by twisting the dial.
c.
Bagel (pg. 10) and defrost (pg. 11)
settings can be turned on/off at any
point during toasting. The bagel and
defrost LEDs will remain partially lit
during the toasting process, and will
brighten upon selection to indicate
they are in use.
6.
To check on your toast, use the
take-a-peek function. (see pg. 10)
7.
To cancel the cycle at any time, press
the “up” arrow twice. The elevator will
raise toast and the unit will “beep” to
indicate the cycle has ended.
8.
When the toasting cycle finishes, your
toast will automatically be raised and
the unit will “beep.”
9.
Unplug your Toaster from outlet after use.
NOTE:
•
Uneven toasting is usually due to bread slices of uneven thickness
and varying moisture or sugar content.
•
Your darkness setting is saved between toasting sessions so your
Toaster will revert to the last setting used.
•
Your OXO On Toaster is designed with a
fail-safe feature
that prevents
the unit from overheating. When an overheat scenario is detected, the
heating elements are disabled and the unit cools down quickly.
CAUTION:
•
The top of the Toaster gets hot while in use. Do not touch during or
after toasting.
•
Do not use Toaster without the crumb tray installed.
WARNING:
•
Always unplug Toaster before cleaning and/or dislodging bread.
•
Do not use a knife or other tool to remove bread from the Toaster.
•
Never touch the internal parts of the Toaster.
•
Never force food into the toasting slots.
•
Do not place buttered breads, pastries with fillings or frostings,
sandwiches, or other food in the Toaster, as this could create a fire
hazard. The Toaster is only intended to toast sliced bread, bagels,
and other such dry bread products.
TO TOAST BREAD:
During the default toasting cycle, all heating elements are on until the chosen darkness
setting is reached or until the cycle is cancelled.
The Particulars of Toasting
Start
Peek/Cancel
Light
Dark
1.
Before toasting, slice each bagel into
two equal halves.
2.
Place halved bagel
into the toasting
slots with the cut
sides facing each
other following the
graphics on the top
of the Toaster. When
toasting one half of a bagel, place it in
the rightmost slot.
3.
Twist dial to select the browning level.
4.
Press the bagel button. Illuminated LED
indicates the feature is activated.
5.
If defrosting a bagel, also press the
defrost button. The defrost LED will
pulse until cycle is finished, then the
bagel cycle will begin.
6.
Press the “down” arrow to lower the
elevator and start the bagel toasting cycle.
a.
To adjust the browning setting during
toasting, twist the control dial.
b.
Bagel setting can be turned on/off at
any point during the cycle.
7.
To check on your bagel, use the take-a-
peek function. (below)
8.
To cancel the cycle at any time, press
the “up” arrow twice. The elevator will
raise toast and the unit will “beep” to
indicate the cycle has ended.
9.
When the toasting cycle finishes, your
bagel will automatically be raised and
the unit will “beep.” Unplug your Toaster
from outlet after use.
TO TOAST BAGELS:
When the bagel setting is activated, power is only directed to the center heating elements,
toasting the cut side of your bagel and leaving the other side soft and warm.
When bagel mode is activated, the “a little extra”
button LED turns off to indicate the feature is disabled.
The bagel LED will pulse until cycle is finished.
3.
If your toast needs more
time, press the flashing
“down” arrow to lower
elevator and resume cycle.
4.
If your toast is done, press the “up” arrow again to turn Toaster off.
5.
If no action is taken, take-a-peek function will time out after 12 seconds and Toaster
will automatically turn off.
NOTE:
Take care to avoid touching hot areas of the Toaster while using the take-a-peek function.
TO TAKE A PEEK:
Easily check the progress and darkness of your toast during any function without ending
or shortening the toasting cycle.
1.
Press the “up” arrow
to pause the toasting/
heating cycle and raise
the elevator.
2.
Take a peek and check
the progress of
your toast.
10
9
