22
Oxford Technical Solutions
Figure 13. Changing the PC’s IP address
The RT-Base S uses a static IP address in the range 195.0.0.10—255. To properly communicate with it,
the IP address of the PC should use a unique address from the same range.
The NAVbase interface
NAVbase can be started by clicking the Start button and typing
navbase
, or by clicking
Start > All Programs > OxTS and selecting NAVbase. The initial launch screen is
shown in Figure 14.
Product Selection page
As NAVbase is our universal base station configuration tool, the first task is to tell the
software which base station it is about to configured. Simply select the product you
wish to configure and click the Next button or click Read Configuration on the left-
hand navigation pane. You will notice that different options are available depending on
the product selected.