background image

RT-Base S User Manual

 

 

Revision: 151112 

 

27 

 

Figure 17. NAVbase Status page 

 

To view the live status, select the IP address of an RT-Base S on the Settings page, then click Next. 

As well as providing visual feedback on the state of the system, the Status page is also 
used to control the file management of the RT-Base S. The data being logged to the 
internal storage system can be restated by clicking the Restart logging button, while the 
currently logged data can be retrieved using the Retrieve data button. 

Position manager 

The RT-Base S uses a specified position or an averaged position to create its 
corrections. The Position manager within NAVbase allows you to manually add 
locations and upload them to the RT-Base S when connected via Ethernet. It is also 
possible to force the RT-Base S to start using a location from the Position manager. 

The main interface of the Position manager is shown in Figure 18. To add a new 
position, select the Add new position button. The New position window opens, where a 
unique name, latitude, longitude and altitude can be entered. Lat/Lon measurements 
should be entered to no fewer than eight decimal places. Existing positions can also be 
loaded via the New position window, by selecting Load from file, and navigating to the 
desired file. 

Summary of Contents for RT-Base S





































Reviews: