OXTS RT-UPS, User Manual

16 

Oxford Technical Solutions

Conformance notices 

The RT-UPS complies with the radiated emission limits for 47CFR15.109:2010 class A 
of Part 15 subpart B of the FCC rules, and with the emission and immunity limits for 
class A of EN 55022. These limits are designed to provide reasonable protection 
against harmful interference in business, commercial and industrial uses. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures: 



Re-orient or relocate the receiving antenna 



Increase the separation between the equipment and the receiver 

The RT-UPS conforms to the requirements for CE. 

Regulator testing standards 



47CFR15.109:2010 class A (radiated emissions) 



EN 300 440-1:2008, test methods 8.3.2 (conducted emissions) and 8.3.3 (radiated 
emissions) 



EN55022 class A according to standard EN 301 489-1:2008 (conducted 
emissions) 



EN6100-4-3 criterion A according to standard EN 301 489-1:2008 (radiated 
immunity) 



ISO7637-2 criterion B, 12 V and 24 V according to standard EN 301 489-1:2008 
(vehicular transients and surges immunity) 



EN60950-1:2006 (safety) 



A11:2009 (safety)