Rev.0 LEPTON
Service
manual
OXYGEN S.p.A.
26
HUMAN INTERFACE
ELECTRONIC KEY INITIALIZATION
LEPTON scooter is equiped with an electronic key ( Figure 9). The key includes
the DRIVE identification code (TRANSPONDER key ). Every key can authorize only
the LEPTON connected with this DRIVE identification code.
In order to make the scooter starting, You have to insert the key correctely into the
connector. The connector is placed on the left side of the legshield (Figure 8). If the
scooter do not start, the message “CODE” appears on the dashboard LCD (8 – Figure
11) and the RED light on the upperframe goes on blinking ( 5 – Figure 11).
Figure 8
Figure 8/a
Figure 9
Figure 10
