ALL RIGHTS RESERVED
USER’S GUIDE
MOTOR FOR SLIDING GATE MOD.
TYPHON 2000KG
Read the instructions carefully before using the
product and keep them for future consultation.
GENERAL SAFETY RULES:
If installed and used correctly, the TYPHON 2000
automated system will ensure a high degree of safety.
Some simple rules regarding behaviour will avoid any
accidental trouble:
• Do not stand near the automated system and do not allow
children and other people to stand there, especially while it
is operating.
• Keep radio controls or any other pulse generator well
away from children to prevent the automated system from
being activated involuntarily.
• Do not allow children to play with the automated system.
• Do not willingly obstruct the gate movement.
• Prevent any branches or shrubs from interfering with gate
movement.
• Keep light signalling systems efficient and clearly visible.
• Do not attempt to activate the gate by hand unless you
have released it.
• In the event of malfunctions, release the gate to allow
access and wait for qualified technical personnel to do
the necessary work.
• After enabling manual operation, switch off the power
supply to the system before restoring normal operation.
• Do not make any alterations to the components of the
automated system.
• Do not attempt any kind of repair or direct intervention
and contact qualified personnel only.
• Call in qualified personnel at least every 6 months
to check the efficiency of the automated
system, safety devices and earth connection.
MANUAL OPERATION
If it is necessary to manually activate the gate due to lack
of power or disruption of automation, you must act on the
release as follows.
RELEASE LEVER
1) Insert the key supplied in the plastic fold and
open it.
2) Pull the lever unlock.
3) Open or close the gate manually.
DESCRIPTION
TYPHON 2000 automated system is ideal for controlling
vehicle access areas of medium transit frequency.
TYPHON 2000 system for sliding gates is an electro-
mechanical operator transmitting motion to the sliding
gate with a rack pinion appropriately coupled to the gate.
Operation of the sliding gate is controlled by an electronic
control unit housed inside the operator or in a hermetically
sealed outdoor enclosure.
When, with the gate closed, the unit receives an opening
command by radio control or from another suitable device, it
activates the motor until the opening position is reached.
If automatic operation has been set, the gate will
automatically close again after the selected pause time has
elapsed.
If the semi-automatic operation has been set, a second
pulse must be sent to close the gate again.
An opening pulse during re-closing always causes the
movement to be reversed.
A stop pulse (if provided) always stops the
movement. The light signal indicates that the gate is
currently moving. For details on the sliding gate
behaviour in different operating logics, consult the
installation technician.
The automated system include obstacle-detection and/or
safety devices (photocells, edges) that prevent the gate
from closing when there is an obstacle in the area they
protect.
The system ensures mechanical locking when the motor is
not operating and, therefore, it is not necessary to install any
lock. Manual opening is, therefore, only possible by using
the release system.
The gear motor TYPHON 2000 has a mechanical clutch, so
it doesn’t need any electronic clutch.
A convenient manual release with customized key makes it
possible to move the gate in the event of a power failure or
malfunction.
RESTORING NORMAL OPERATION
To prevent an inadvertent boost could move the gate
during the manoeuvre, turn off the power supply , before
locking again
the motor.
RELEASE LEVER
1) Close the unlock lever.
2) Move the gate until the release system meshes.
3) Close the plastic fold and restore the power supply to the
System
