USER MANUAL Model No: 4282
5.
Place the Front fan guard that you have just created in the last step, place on the fan body making sure the
holes align at the bottom of both fan guards. Please place the nut and bolt through each hole and tighten.
Fold each tab down to secure the front guard into place. Check over your product thoroughly before use.
Operating Instructions
Notice: Please read all instructions carefully before using this product
1.
Ensure voltage used corresponds with the voltage indicated on the rating label.
2.
Press the speed control to selected speeds: 0 (Off) and speeds 1, 2 and 3 for slow, medium and fast.
3.
Tilting angles-By pushing the tilt-guard, you can adjust the fan to an elevation of your preference.
4.
Never touch the blades with your hand or any object!
5.
Do not pull the power cable too hard. If damaged after use, get any repairs performed by a qualified electrician.
6.
To start oscillation, push down on the knob on the top of the fan body.
7.
To stop oscillation, pull up on the knob on the top of the fan body.
