USER MANUAL Model No:
USER MANUAL Model No: 3748
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Operating Instructions
1.
Place the 10L Key Operated Safe against the surface you wish to mount it on and mark the holes
in the safe onto the surface.
2.
Once done, drill a support screw though the hole in the 10L Key Operated Safe and into the
desired surface, ensuring that it goes through the safe and the desired surface.
3.
Slide a washer onto the support screw, ensuring It touches the surface that the 10L Key
Operated Safe is against. Once done, tighten a nut onto the support screw. Do not overtighten
as you may damage the surface.
4.
Repeat the previous two steps with the remaining support screw, washer and nut.
5.
Once completed, ensure that the 10L Key Operated Safe is securely held in place against the
desired surface. Make sure that you do not lose either set of keys.
