16
© Oz inventions
Version 1.8
Velocity (v)
Range 0 – 127;
Default sensitivity to speed is dependent on the position of the sensitivity control. Higher (clockwise)
sensitivity requires less speed to reach the maximum depth.
This mode is designed for moving at different speeds. Faster speeds modulate more than slower speeds.
Flick (F)
Range 0 – 127;
This mode is designed for forces. Stronger forces modulate more than weaker forces. It is designed as a
trigger for the ADSR envelope but may also be used with very rapid movements.
The sensitivity adjustment controls how much force is required to reach the maximum depth as set by the
maximum depth control.
Guitar-hand(G)
Default 0 – 90 degrees; Range 0 – 720 degrees;
This mode is designed for the specific rotation of a guitar or keyboarding hand.
Calibration is usually required before use.
See
Rotation and Guitar-hand mode calibration process
pg 35
As with ‘Rotation’ mode, the bidirectional switch enables a continuous circle.
Automatic ADSR (A)
Plays the ADSR envelope as set within the ADSR menu
See Understanding ADSR, Automatic ADSR mode and ADSR trigger mode
Playback recorded ADSR (P)
Plays the recorded ADSR envelope as recorded in record mode.
See Understanding recording pg 37