31
© Oz inventions
Version 1.8
Scale (Sc)
Default 1; Range 1 – 99
Changes the overall envelope time by a factor of 1 - 99.
When scale is set to 1,
All rates are adjustable from 1 - 99 in 10 millisecond increments giving a total period of approximately 1
second for each stage. Settings below 5 can bring unwanted intermittent results.
When scale is set to 10
All rates are adjustable from 1 - 99 in 100 millisecond increments giving a total period of approximately 10
seconds for each stage.
When scale is set to 99
All rates are scalable from 1 - 99 in 1 second increments giving a total period of approximately 99 seconds for
each stage depending on the sustain level setting.
Scale
(value)
Increment size
(milliseconds)
Total length of ADSR envelope
(seconds)
1
10
1
2
20
2
3
30
3
4
40
4
5
50
5
.
.
.
10
100
10
20
200
20
30
300
30
.
.
.
90
900
90
100
1000 (1 second)
100
Table 1
System reset
System reset restores the unit to its default settings. See
Default settings pg 55
To reset the device
Reset the device by holding the modulation mode switch forward whilst powering on the device.
The display will show ‘rst-‘
Releasing the modulation mode switch will restore default settings and reboot the device
Alternatively, removing power whilst the switch is still held will retain the stored settings.