33
© Oz inventions
Version 1.8
Preset selection
The preset selection enables changing between ten available presets numbered 0 - 9.
The presets are access by rotating the maximum depth control fully counter clockwise (0) and rotating the
minimum depth control fully clockwise (127). The presets can then be changed by pulling forward the
modulation mode toggle switch. To exit preset selection, change the minimum and maximum depth controls
to any other position.
Presets (PS)
Default – 0; Range 0 – 9;
Any changes made to the current preset are lost when a new preset is selected. Therefore, preset changes
should be saved when required by accessing the ‘Save’ menu item available in the ‘System’ or ‘Step size’
menus.
Selecting ‘Save’ in any menu will save all menu items from all menus, all calibration values and the current
modulation mode, to the currently selected preset.
Having presets enables quick changes. For example -
Presets enable quick changes between effect units/keyboards/MIDI controllers that have different
polarity and resistance settings
Presets enable quick changes between different customisable step sizes
Presets enable quick changes between different calibration settings
Upon first powering up the unit after manufacture, all presets will have the same default values (pg 55)