3
KK-1302-0001 R(11)
29.03.2022
1. GENERAL INFORMATION
1.1 Preface
1.2 General Information on Turnstiles
1.3 Waist Height Turnstile Models
MANUFACTURER:
ÖZAK Geçiş Teknolojileri Sanayi Ticaret A.Ş.
Address :
Çuhane Caddesi No:130 41080 Köseköy-KARTEPE / KOCAELİ
Tel & Fax
:
+90 262 373 48 48 Pbx.
E-mail :
ozak@ozak-t.com
Web
:
www.ozak-t.com
Thank you for choosing the products of
Özak
and your confidence in our company.
Your system has been designed and manufactured to meet the most demanding requirements of professional
access control applications. All components of your system have been selected with utmost care and thoroughly
tested to ensure optimal performance and reliability.
To safely operate your product with maximum performance and service life please follow the instructions
written in this manual carefully, and keep it for future reference. In case of any operational questions or
unexpected issues please refer to the explanations contained in this document.
To obtain technical support or replacement parts please contact Özak Technical Service Department by
E-mail or telephone.
Özak Technical Service Department:
Telephone :
+90 262 373 48 48
Ext:
1301-1304
E-mail :
support@ozak-t.com
Özak reserves the right to change the contents of this document without prior notice!
Turnstiles are devices that enable passage control and prevent uncontrolled or unauthorized passages in
stadiums, sports halls, leisure facilities, business centers, public transportation areas, museums, banks, industrial
facilities and all premises where collective entrance and exit control are required.
As passage controlling units, turnstiles have the ability to work with any type of access control system such as
barcode, magnetic card, proximity card readers, tokens, buttons etc. With the exception of disabled wide-access
panel models, only “one person at a time” philosophy is adopted for all turnstile products. The turnstiles are
designed for bi-directional operation while allowing simple mode selection by a dip switch for restricted or one
way free passage.
The turnstiles are made of stainless steel or electrostatic powder coated DKP sheet metal. In double-sided
models, two separate passage systems are integrated into a single structure. As the turnstiles are anchored on
a wide surface area, the overall structure is firmly balanced and robust. Due to their structural characteristics,
turnstiles are not affected by rain, water, or similar outdoor conditions. All mechanical components are
galvanized for protection against corrosion.
Our turnstiles are certified with “TSEK product quality” (A Turkish certification of quality) and CE Declaration of
Conformity.
400 E
602
602 D
700 E/700 E N1
715 B
715 E
705 E/705 E N1
700 R
FKR 777
702 R/702 R N1
SWG 101
MRKT 404
702 B
500 E/500 E N1
500 E-D/500 E-D N1
700 E-D/700 E-D N1
400 BUS
605 D
605
705 E-D/705 E-D N1
