Taking Down Your Tent
–
Unzip doors and windows and collapse the tent,
removing and disassembling the poles. Place
poles in the pole storage bag and tie shut.
–
Remove stakes. Do not remove stakes from the
ground by pulling on the stake loops. This may
cause the stake loops to tear out of the seam.
–
Spread tent out flat with all loose fabric and
rainfly (if tent has one) within the edges of the
tent base. Try to flatten tent as much as possible.
–
Fold tent in half, thirds or quarters. (Folding
depends on the length of the tent pole sections.)
–
Place pole bag on back end of tent (trapped air is
more easily forced out of the open door when
you are rolling up the tent.) The folded tent
should be the width of the pole bag.
–
Beginning at the back end, roll your tent tightly
around the pole bag, forcing out excess air as you
roll. Keep tent edges straight and pole bag
centered as you roll.
–
When tent is rolled up, tie strap around it and
place into tent carry bag with stake bag, instruc-
tion sheet, and other miscellaneous parts. If tent
won’t fit into bag, unroll and reroll more tightly.
Dimension A should
be close to but not
exceed the length of
the pole bag.
A
Fold tent into a
rectangular shape.
front of tent
(door unzipped)
D
B
G
H
(inside screenhouse)
E
