USER SERVICING INSTRUCTION
NOTE: THIS FAN IS EQUIPPED WITH A FUSE. ALWAYS UNPLUG THE
FAN BEFORE REPLACING FUSES. IF THIS FAN LOSES POWER AND YOU
SUSPECT THE FUSE IN THE PLUG HAS BLOWN, UNPLUG THE FAN,
THEN SLIDE THE FUSE DOOR FOUND ON THE SIDE OF THE PLUG TO
THE OPEN POSITION. SLIDE THE FUSE DOOR OUTWARD UNTIL THE
BLOWN FUSE IS FULLY VISIBLE. REMOVE THE BLOWN FUSE AND SNAP
THE REPLACEMENT FUSE INTO PLACE. FULLY CLOSE THE FUSE DOOR.
ONLY REPLACE WITH A FUSE RATED AT 2.5 AMPS, 125 VOLTS.
Use this fan only as described in this manual.
Check the voltage indicated on the rating plate. This fan is designed for a 120V-60Hz
electric supply. Make certain the power source conforms to these electrical requirements.
Make sure the room where this fan will be used has a working smoke detector.
Assemble the fan completely before use.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should
not be removed. Discard product if the attachment plug is damaged.
3