3
INTRODUCTION
Warning!
When using mains-powered equipment, basic safety precautions,
including the following, should always be followed to reduce risk of fire, electric
shock, personal injury and material damage.
Read and understand the manual prior to operating this product.
Save these instructions and other documents supplied with this product for future reference.
This electrical equipment has been designed for 230V and 240V only.
Always check that the power supply corresponds to the voltage on the rating plate.
Note:
The supply of 230V and 240V on Ozito products are interchangeable for Australia
and New Zealand.
If the supply cord is damaged, it must be replaced by an electrician or a power tool
repairer in order to avoid a hazard.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this electrical
equipment. Before use, inspect the extension lead for signs of damage, wear and
ageing. Replace the extension lead if damaged or defective. When using an extension
lead on a reel, always unwind the lead completely. Use of an extension lead not suitable
for the power input of the equipment or which is damaged or defective may result in a
risk of fire and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not use
multiple extension leads.
Congratulations on purchasing an Ozito Arc Welder.
We aim to provide quality products at an affordable price.
We hope you will enjoy using this product for many years.
The Ozito Arc Welder AWG-964 has been designed to
weld most steel products. Its varying current range,
lightweight and portability make it an ideal welder for
many jobs.
It is intended for DIY use only.
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
