3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Front sure grip handle
2. Hook & loop sanding pad
3. Variable speed dial
4. Rear sure grip handle
5. On/Off switch
6. Dust extraction port
DELTA SANDER
ACCESSORIES
KNOW YOUR PRODUCT
1. HOOK & LOOP SANDING SHEET
SETUP & PREPARATION
Ensure the tool is disconnected from the power supply
before performing any of the following operations.
2. To remove, peel the sanding
sheet off sanding pad from
one corner.
3. Replace hook & loop
sanding pad when worn (see
maintenance section).
1. When placing the sheet, align the holes on the sanding sheet with
the holes on the sanding pad. Press firmly to secure.
7. Sanding sheets x 3
8. Dust extraction adaptor