1 Make a loop with the
extension cord and push it
through the hole under the
on/off switch.
3 Connect the extension
cord socket to the hedge
trimmer power cord.
2 Place the loop onto the
cord retainer and ensure it
is pulled firmly into place.
2. CORD RETAINER
3. CHECKS PRIOR TO OPERATION
WARNING!
ENSURE THE HEDGE TRIMMER IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
NOTE:
TO AvOID THE ExTENSION CORD FROM DETACHING;
ALWAYS CHECk THAT THE CORD IS ATTACHED TO THE CORD
RETAINER BEFORE USE.
Using the Cord Retainer
1 Check that the blades
are not damaged. if so
the blades will need to be
replaced.
3 Check that the extension
cord is positioned in the
cord retainer firmly.
2 Make sure that the safety
guard is attached securely.
Before Using the Hedge Trimmer
WARNING:
MAkE SURE THAT THE WORk AREA IS FREE OF
ROCkS, DEBRIS, LINES AND OTHER FOREIGN OBjECTS.
Using an extension lead
Always use an approved extension lead suitable for the power input of
this tool. Before use, inspect the extension lead for signs of damage,
wear and ageing. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead
completely. Use of an extension lead not suitable for the power input of
the tool or which is damaged or defective may result in a risk of fire and
electric shock.
