MAINTENANCE
Cleaning
1. We recommend that you clean the appliance immediately after you use it.
2. Keep the safety devices free of dirt and dust as much as possible. Wipe the equipment with
a clean cloth.
3. Clean the appliance regularly with a damp cloth and some soft soap. Do not use cleaning
agents or solvents; these may be aggressive to the plastic parts in the appliance. Ensure
that no water can get into the interior of the appliance.
Storage
Pull the mains plug out of the socket, switch off the tool and make sure that it is secured in
such a way that it cannot be started up again by any unauthorised person.
Store the tool in a dry location which is not accessible to unauthorised persons.
Supply Cords
If replacement of the supply cord is necessary, this has to be done by a certified electrician in
order to avoid a safety hazard.
Note:
Ozito Industries will not be responsible for any damage or injuries caused by the repair
of the tool by an unauthorised person or by mishandling of the tool.
WARNING!
BEFORE CLEANING THE APPLIANCE OR CARRYING OUT ANY
MAINTENANCE PROCEDURE, MAKE SURE THAT IT IS DISCONNECTED FROM
THE POWER SUPPLY TO PREVENT ACCIDENTAL STARTING.
