background image

HEX TORX PHILLIPS

POSI

DRIVE

FLAT

HEX TORX PHILLIPS

POSI

DRIVE

FLAT

PUSH 2 GO

SCREWDRIVER

KIT

3.6V LI-ION

INSTRUCTION MANUAL

SPECIFICATIONS

Voltage: 3.6V
Chuck Size:  

6.35mm (¼”)

No Load Speed: 

0-260/min

Speed Settings: 

6

Max. Torque:  

5Nm

Battery:  

1.5Ah Li-Ion

Weight: 0.95kg

OSDK-536

STANDARD EQUIPMENT

3 YEAR REPLACEMENT WARRANTY*

Your product is guaranteed for a period of 

36 months from the original date of purchase.

 If 

a product is defective it will be replaced in accordance with the terms of this warranty. Warranty 
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.

WARNING

The following actions will result in the warranty being void.

•   If the tool has been operated on a supply voltage other than that specified on the tool.
•   If the tool shows signs of damage or defects caused by or resulting from abuse, accidents 

or alterations.

•   Failure to perform maintenance as set out within the instruction manual.
•   If the tool is disassembled or tampered with in any way.
•  Professional, industrial or high frequency use.

WARRANTY

Ozito Industries Pty. Ltd. 

25 Fox Drive, Dandenong South, Victoria, Australia 3175.

ozito.com.au

3.6V Cordless Screwdriver

32 x 25mm Driver Bits (5 x Hex, 7 x 
Torx, 8 x Phillips, 7 x Posidrive & 5 
x Flat Head), Bit Holder & Magnetic 
Bit Holder

USB Charging Cable & Kitbox

0521

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY 
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST 
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS 
REGISTER RECEIPT. PRIOR TO RETURNING YOUR 
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR 
CUSTOMER SERVICE HELPLINE:

Australia: 1800 069 486 
New Zealand: 0508 069 486

The benefits provided under this warranty are in addition to other rights and remedies which 
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a 
replacement or refund for a major failure and for compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the 
goods fail to be of acceptable quality and the failure does not amount to a major failure. 
Generally you will be responsible for all costs associated with a claim under this warranty, 
however, where you have suffered any additional direct loss as a result of a defective product 
you may be able to claim such expenses by contacting our customer service helpline above.

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE 
THE MODEL NUMBER AND DATE OF PURCHASE 
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE 
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS 
YOU MAY HAVE RELATING TO THE WARRANTY POLICY 
OR PROCEDURE.

Summary of Contents for OSDK-536







Reviews: