Only use the shredder in dry conditions and never outdoors when it is raining.
Never use the shredder with damaged safety devices or without protection.
Ensure all customer assembled hex-screws and nuts are properly tightened before use.
Wear protective gloves, safety glasses and avoid loose clothing.
Keep hands, other parts of your body and clothing away from the feeding hopper and
the discharge chute.
Store shredder upright in a dry place when not in use.
Remove the silent shredder and its contents from within the carton.
1. Carefully place the machine upside down resting on the feeding hopper. Position
the legs ensuring they are assembled so that they are angled outwards (fig.1).
2. Secure the legs to the machine with the washers and hex-screws, using the 6mm
allen key provided (fig.1).
3. Feed the wheel axle though the holes in leg stand (fig.2).
4. Fit a flat washer, sleeve washer, wheel, flat washer then lock nut to the axle.
Repeat on the opposite side. Only hand-tighten the lock nuts (fig.2).
5. Carefully turn the shredder upright so it is standing on the leg stand and wheels.
6. Tighten the wheel lock nuts simultaneously using 13mm spanners, taking care not
to over-tighten.
7. Press the wheel caps onto the wheels.
8. Return the allen key to the holder, making it readily available.
SAFETY INSTRUCTIONS FOR SILENT SHREDDERS
6
ASSEMBLY
Fg.2
Fg.1
