ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. ASSEMBLY
TILLER
1
2
3
4
5
6
7
8
9
1. Start/Stop Lever
2. Lock-off Button
3. Upper Handle
4. Wing Nut
5. Lower Handle
6. Motor Housing
7. Lower Handle Bracket
8. Metal Guard
9. Tines
1. Slide the Extension Cord
Restraint onto the Upper
Handle.
3. Use the
supplied cable
clips to hold
cable in place.
1. Insert the Lower Handle
to Lower Handle Brackets
and fix in place with the
supplied bolts and nuts.
2. Connect to the Lower Handles by inserting the supplied bolts
and wing nuts
Fitting the Lower Handle
Fitting the Upper Handle
WARNING!:
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.