The planer has a precision machined groove in the front shoe for
planing along the corner of your workpiece.
PLR-5000U
4. ADJUSTING THE PLANER
5. PLANING
2 Place groove precisely
on the corner of the
workpiece.
1 Set required depth on
planer.
1 Loosen the rebate fixing
knob.
2 Plane along
workpiece
using the fence
as a guide.
1 Mark out area for rebate.
2
1
3
Adjusting the Rebate Guide
Chamfering
Adjusting the Parallel Guide
2 Slide rebate bracket to the
required depth.
3 Tighten the rebate fixing
knob to secure depth.
Making a Rebate Cut
Note: It will be necessary to make a number of cuts to complete
most rebates.
3 Plane along the edge of
your workpiece.
1 Loosen parallel guide knob.
2 Slide guide to the required
position.
3 Tighten guide fence depth
knob to secure position.
4 After adjusting the parallel guide, make sure the guide is clear of
the blade before operating.
