ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Front Base Plate
2 Depth Adjustment Knob
3 Dust Extraction Chute
4 On/Off Trigger
5 Lock-Off Button
6 Automatic Base Park Shoe
7 Rear Base Plate
PLANER
KNOW YOUR PRODUCT
1. ASSEMBLY
10 Parallel Guide
11 Angle Bracket
12 Rebate Guide
13 Vacuum Hose Adaptor
ACCESSORIES
SETUP & PREPARATION
WARNING!
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
1 Place the Rebate Guide in
the slot on the same side as
the Dust Extraction Chute.
The Rebate Guide allows a specific rebate depth to be achieved.
NOTE:
The Rebate Guide is attached on the same side as the Dust
Extraction Chute.
12
13
11
10
3 4
5
6
7
Attaching The Rebate Guide
2 Place one of the supplied
thumbscrews into the slot
and tighten by rotating it
clockwise.
1 Fasten the Angle Bracket to
the Parallel Guide using the
supplied carriage bolt and
wingnut.
Attaching The Parallel Guide
2 Align the Angle Bracket with
the hole on the side of the
planer.
3 Place one of the supplied
thumbscrews into the hole
and tighten by rotating it
clockwise.
Dust Extraction
For optimum dust extraction, a vacuum hose (not supplied) can be
fitted to the tool by using a Dust Extraction Adaptor (supplied).
1 Insert the Dust Extraction
Adaptor into the Dust
Extraction Chute.
2 Connect a vacuum hose
to the Dust Extraction
Adaptor.
2
1
