Worklight
The worklight provides additional
lighting while the saw is operating
to help you see what you are
cutting.
Pressing the lock-off button in
either direction will automatically
trigger the worklight.
Dust Extraction Port
A vacuum hose or dust extractor
can be fitted to the dust extraction
port to help keep your workpiece
clean.
1. Mark the cutting line on the
workpiece.
WARNING!
INSPECT MATERIAL BEFORE CUTTING.
REMOVE ANY NAILS/FOREIGN OBJECTS BEFORE
STARTING THE CUT.
WARNING!
MAKE SURE THE WORKPIECE IS
SECURELY CLAMPED TO A WORKBENCH BEFORE
MAKING ANY CUTS.
WARNING!
ENSURE THE TOOL IS COMPLETELY
STOPPED AND THE BATTERY IS REMOVED BEFORE
MAKING ADJUSTMENTS/INSPECTION.
2. Adjust the saw depth and bevel
angle for the desired cut.
3. Attach the rip fence for an
additional guide.
4. Hold the saw securely with both
hands and start the tool.
Note:
Allow the blade to reach
steady speed before beginning the
cut.
WARNING!
KEEP HANDS & BODY PARTS AWAY
FROM THE BLADE AT ALL TIMES.
5. Move the saw through the
material to perform the cut. Once
complete, release the on/off
trigger and remove the saw from
the workpiece.
Note:
Never force the saw; allow the tool to do the work. Use light and
continuous pressure whilst cutting.
45°
30°
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
45°
30°
0°
0°
5°
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
45°
30°
RIGHT HANDED SAW
THIS SIDE OUT
24
184
MM
TOOTH
Max. Speed 9500rpm
Bore: 20mm
Thickness: 1.6mm
TUNGSTEN
CARBIDE
TEETH
(7¼”)
WARNING!
Do not use tungsten carbide tipped blades for
masonry or metal cutting applications.
PXBCSS-184
5. MAKING A CUT
