Ozito PXC-BIKE, Instruction Manual

Push Assist

The Push Assist makes it easier for you to wheel the bike around, for 

example when pushing the bike up a ramp. This is restricted to 6km/h and is 

not for cycling.

WARNING! 

THE PUSH ASSIST WILL 

AUTOMATICALLY SHUT OFF ONCE THE SPEED 
EXCEEDS 6KM/H. 

1.  To activate the Push Assist, press 

and hold down the ‘-’ button on 

the Speedometer.

2.  To de-activate Push Assist, release the ‘-’ button. The assist will also stop 

automatically if the pushing speed exceeds 6km/h.

Pedal Assist

A boost is available up to 25km/h. This can be controlled via the 

Speedometer unit. This is indicated on the right side of the screen.

1.  Whilst cycling, press the ‘+’ 

button on the Speedometer to 

increase the assist level.

Note:

 There are 5 assist levels. 

The default level is 1. The bike may 

also be cycled without engaging the 

Pedal Assist by setting the assist 

level to 0.

2.  To decrease the assist level, 

press the ‘-’ button on the 

Speedometer.

Note:

 The pedal assist system is able to provide a maximum boost of 

25km/h. However this maximum boost speed can be lowered down to 

12km/h via the Pedal Assist Limiter menu in the speedometer settings. This 

means that if the pedal assist is limited to 15km/h, the pedal assist function 

will only provide assistance up to this speed, any additional speed achieved 

will be via pedalling the cranks.

PXC-BIKE

5. POWER ASSIST

6. SPEEDOMETER CONTROLS

km/h

FULL

TRIP

ASSIST

km

MAX

km/h

FULL

TRIP

ASSIST

km

MAX

km/h

FULL

TRIP

ASSIST

km

MAX

Powering the Unit

1.  To turn the unit on or off, press 

the ‘M’ button for 2 seconds. 

Note: 

The display will automatically shut off after 10 minutes of 

inactivity.

Changing the Speed Display

The default on startup is Real-Time Speed. 

1.  Pressing and holding the ‘M’ 

and ‘+’ buttons simultaneously 

for 2 seconds cycles the setting 

through ‘Average Speed’ and 

‘Max. Speed’.

Distance Display

1.  The default display is Trip 

Distance (TRIP). Pressing ‘M’ 

cycles it between this and Total 

Distance (ODO).

2.  Long press ‘M’ and ‘-’ to reset 

the Trip Distance (TRIP) to 0.

Backlight

1.  Pressing and holding the ‘+’ 

button for 2 seconds turns the 

screen backlight on and off.

km/h

FULL

TRIP

ASSIST

km

MAX

km/h

FULL

TRIP

ASSIST

km

MAX

AVG MAX

km/h

FULL

TRIP

ASSIST

km

MAX

ODO

km/h

FULL

TRIP

ASSIST

km

MAX

km/h

FULL

TRIP

ASSIST

km

MAX