3. INSERTING & REMOVING THE BATTERY
4. CONTROLS & OPERATION
OPERATION
1. Align the ribs of the battery with
the recess at the back of the
handle.
1. Press and hold the safety switch
and then squeeze the on/off
trigger to start.
1. Press and hold the battery
release tab and then slide out.
2. Slide the battery in so
that it clicks into place.
2. To stop operation,
release the on/off
trigger.
Inserting a Battery (not included)
Removing a Battery
Switching On and Off
PXCGSS-018
Top cutting
Use a wide sweeping motion. A slight
downward tilt of the cutting blades in the
direction of motion gives the best cutting
results.
Side cutting
When trimming the sides of the hedge, begin
at the bottom and cut upwards. Trim the side
of a hedge so that it will be slightly narrower
at the top. This shape will expose more
of the hedge, resulting in a more uniform
growth.
WARNING!:
DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INjURY.
WARNING!
CLEAR THE AREA TO BE CUT BEFORE
EACH USE. REMOVE ALL OBjECTS, SUCH AS CORDS,
LIGHTS, WIRE, OR STRING WHICH CAN BECOME
ENTANGLED IN THE CUTTING BLADE AND CREATE A
RISk OF SERIOUS PERSONAL INjURY.
WARNING!:
IF THE BLADE jAMS ON AN HIDDEN
ELECTRICAL CORD, DO NOT TOUCH THE BLADE!
IT CAN BECOME LIVE AND VERY DANGEROUS.
DISCONNECT THE ELECTRICAL SERVICE TO THE
DAMAGED LINE BEFORE ATTEMPTING TO FREE THE
BLADE.
Move the grass shear parallel to the ground. Direct the shear forward smoothly. Do not
sweep the shear from side to side as this will not allow the blade to cut properly.
Using the Grass Shear:
