ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 Align the hole in the dust
canister with the outlet and push
in until it clicks into place.
1 With the dust canister removed,
slide the dust extraction adaptor
onto the outlet with the cutout
facing down.
1 Align the sandpaper with the pad starting from the tip and press on.
2 Replace the sandpaper once it is worn.
2 To remove, simply pull
the dust canister away
from the sander.
2 A dust extractor pipe can then be connected to the adaptor.
Attaching the Sandpaper
Fitting and Removing the Dust Canister
Fitting the Dust Extraction Adaptor
WARNING!
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
CORDLESS DETAIL SANDER
1 2
3 4 5
1 Hook & Loop Pad
2 On/Off Switch
3 Sure Grip Handle
4 Battery Seating
5 Dust Canister
ACCESSORIES
6 7
6 Dust Extraction Adaptor
7 Sandpaper
