background image

size 445 x 210 mm

Charger indicator / Fast Charger

Indicator status

Explanations and actions

Red LED

Green LED

Off

Flashing

Ready for use

The charger is connected to the mains and is ready for use; there is no

battery pack in the charger

On

Off

Charging

The charger is charging the battery pack in quick charge mode.

Off

On

The battery is 85% -100% charged and ready for use.

(Charging time for 1.5 Ah battery: 30 min)

(Charging time for 2.0 Ah battery: 40 min)

(Charging time for 3.0 Ah battery: 60 min)

(Charging time for 4.0 Ah battery: 80 min)

(Charging time for 5.2 Ah battery: 105 min)

Action:

Take the battery pack out of the charger. Disconnect the charger from

the mains supply.

Flashing

Off

Adapted charging

The charger is in gentle charging mode.

For safety reasons the charging is performed less quickly and takes 

more than 1 hour. The reasons can be:

- The battery pack has not been used for a very long time or an already 

flat battery was further discharged (exhaustive discharge).

- The battery pack temperature is outside the ideal range (between 25° 

C and 45° C).

Action:

Wait for the charging to be completed; you can still continue to charge 

the battery pack.

Flashing

Flashing

Fault

Charging is no longer possible. The battery pack is defective.

Action:

Never charge a defective battery pack.

Take the battery pack out of the charger.

On

On

Temperature fault

The battery pack is too hot (e.g. due to direct sunshine) or too cold 

(below 0° C).

Action:

Remove the battery pack and keep it at room temperature (approx. 20° 

C) for one day .

Items supplied

Please check that the article is complete as 

specified in the scope of delivery. If parts are 

missing, please contact our service center or the 

sales outlet where you made your purchase at 

the latest within 5 working days after purchasing 

the product and upon presentation of a valid bill 

of purchase. Also, refer to the warranty table in 

the service information at the end of the operating 

instructions.

• 

 Open the packaging and take out the equip-

ment with care.

• 

 Remove the packaging material and any 

packaging and/or transportation braces (if 

available).

• 

 Check to see if all items are supplied.

• 

 Inspect the equipment and accessories for 

transport damage.

• 

 If possible, please keep the packaging until 

the end of the guarantee period.

Battery and charger sold separately. This tool is 

compatible with all 18V battery and chargers from 

the Power X Change range.

Danger!

The equipment and packaging material are 

not toys. Do not let children play with plastic 

bags, foils or small parts. There is a danger of 

swallowing or suffocating!

Proper use

The cordless portable fan is designed for air  

circulation in closed rooms.

The equipment is to be used only for its prescri-

bed purpose. Any other use is deemed to be a 

case of misuse. The user / operator and not the 

manufacturer will be liable for any damage or inju-

ries of any kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial 

applications. Our warranty will be voided if the 

machine is used in commercial, trade or industrial 

businesses or for equivalent purposes.

Technical data

Fan blade diameter:  ................................ 230mm

Fan speed:  ...................... 1,400/min  /  2,400/min

Air speed:  ................................ 3.2 m/s  /  5.0 m/s

Tilt adjustment:  ............................................0-90°

Weight:  .......................................................1.8 kg

Danger!

Sound and vibration

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever 

necessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in ac-

cordance with instructions, certain residual 

risks cannot be rules out. The following ha-

zards may arise in connection with the equip-

ment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protecti-

on is used.

3.   Health damage caused by hand-arm vibra-

tions if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

For EU countries only

Never place any electric power tools in your 

household refuse.

To comply with European Directive 2012/19/EC 

concerning old electric and electronic equipment 

and its implementation in national laws, old elec-

tric power tools have to be separated from other 

waste and disposed of in an environment-friendly 

fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to 

the manufacturer, the owner of the electrical 

equipment must make sure that the equipment 

is properly disposed of if he no longer wants to 

keep the equipment. The old equipment can be 

returned to a suitable collection point that will 

dispose of the equipment in accordance with the 

national recycling and waste disposal regulations. 

This does not apply to any accessories or aids 

without electrical components supplied with the 

old equipment.

This consignment contains lithium-ion batteries.

In accordance with special provision 188 this 

consignment is not subject to the ADR regula-

tions. Handle with care. Danger of ignition in case 

of damage to the consignment package. If the 

consignment package is damaged: Check and 

if necessary repackage. For further information 

contact: 0049 1807 10 20 20 66 (fixed network 

14 ct/min, mobile phone max. 42 ct/min) Outside 

Germany charges will apply instead for a regular 

call to a landline number in Germany.

Beiblatt_PXPFS_850U.indd   2

12.05.16   14:27

Summary of Contents for PXPFS-850U









Reviews: