3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
After removing the shredder from
the carton, check that the shredder
has not been damaged. Unpack the
contents.
Fitting the wheels and stand
1. Carefully place the shredder
housing upside down on a flat
surface. Place each leg of the
stand into the two holes at the
base of the shredder housing.
2. Using a screwdriver
(not included) secure the
legs using the two assembly
screws provided, turn in a
clockwise direction to tighten.
3. Thread the axle through
the leg stand.
4. Place wheel spacer over protruding
ends of axle.
1. Transport handle
2. Hopper
3. Locking knob
4. On/Off switch
5. Power cord
6. Collection bag hook
7. Motor housing
8. Discharge chute
9. Stand
10. Wheel
11. Push stick
12. Collection bag
13. Hex key
RAPID SHREDDER
ACCESSORIES
KNOW YOUR PRODUCT
1. WHEELS & STAND
ASSEMBLY
1
2
3
4
5
6
7
8
9
WARNING!
YOU MAY REQUIRE ASSISTANCE
LIFTING THE SHREDDER OUT OF THE CARTON.
11
12
WARNING!
ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
10
13
