Ozito SDU-5100 Instruction Manual Download

Page: 3 / 8

2. CHANGING DRIVER BITS

3. CONTROLS

Installing CRV Drive Bits

1. Insert the CRV bit directly into the magnetic bit holder.

Removing CRV Drive Bits

Pull firmly on the CRV bit until it is released from the magnetic bit

holder.

2. Pull gently on the CRV bit to ensure it is properly secured.

FWD

REV

1. To start drilling squeeze

the on/off trigger.

2. To stop drilling release

the trigger.

On/off Trigger

Forward/ Reverse Lever

1. For forward rotation, push the lever hard left. For reverse

rotation push lever to the right.

Summary of Contents for SDU-5100

Page 1: ...AL SPECIFICATIONS Voltage 3 6V Bit Holder Size 6 35mm 1 4 No Load Speed 180 min Max Torque 3 5Nm Battery 1 3Ah Li ion Charge Time 3 5 Hours Weight tool only 0 34kg SDU 5100 WHAT S IN THE BOX Cordless Screwdriver Driver Bits x 29 Charging Cable ozito com au ...

Page 3: ...ly on the CRV bit until it is released from the magnetic bit holder 2 Pull gently on the CRV bit to ensure it is properly secured FWD REV 1 To start drilling squeeze the on off trigger 2 To stop drilling release the trigger On off Trigger Forward Reverse Lever 1 For forward rotation push the lever hard left For reverse rotation push lever to the right ...

Page 4: ...e screw to be fastened 1 Check the forward reverse lever is on desired setting 3 Squeeze the on off trigger to start the screwdriver 4 Fasten the screw into the workpiece Note Do not force the screwdriver or apply side pressure to elongate the hole Let the screwdriver do the work FWD REV ...

Page 6: ...DU 5100 How To Order Available spare parts can be ordered through the Special Orders Desk at any Bunnings Warehouse If you have any further questions please contact Ozito Customer Service on Australia 1800 069 486 New Zealand 0508 069 486 enquiries ozito com au ...